Articles

• Design and Analysis of 0.127 m (5”) Cutthroat Flume, Ain Sham Engineering Journal, October 2015
• Rating Adjustment for Settlement of Cutthroat Flumes, Journal of Irrigation and Drainage Engineering, Vol. 124, No. 6, November / December 1998
• Revising the Cutthroat Flume Settlement Rating Adjustment Procedure, Journal of Irrigation and Drainage Engineering, Vol. 127, No. 1, January 2001
• Selection and Installation of Cutthroat Flumes for Measuring Irrigation and Drainage Water, Colorado State University Experiment Station, Fort Collins, Technical Bulletin 120, December 1973
• Installation and Field Use of Cutthroat Flumes for Water Management, Water Management Technical Report No. 19, U.S. Department of State, Agency for International Development, PB 224 293, AER71-72GVS-RSB-WRW 4, March 1972
• Generalized Discharge Relations for Cutthroat Flumes, Journal of the Irrigation and Drainage Division, Vol. 98, No. IR4, December 1972  
• Cutthroat Flume Discharge Relations, Water Management Technical Paper No. 16, Colorado State University, AER71-72RSB6, March 1972
• Discharge Measurement Structures, 3rd Edition, International Institute for Land Reclamation and Improvement, Publication 20, 1989
• Unified Equations for Cutthroat Flumes Dervied from a Three-Dimensional Hydraulic Model, Utah State University, 2012
• Design and Calibration of Submerged Open Channel Flow Measurement Structures:  Part 3 - Cutthroat Flumes, Utah Water Reserach Laboratory, Utah State University, January 1967
• Cutthroat Flumes for Water Measurement, Office of Agriculture, Bureau for Technical Assistance, Agency for International Development, 1974
• Generic Free-Flow Rating for Cutthroat Flumes, Journal of Hydraulic Engineering, Vol. 139, No. 7, July 2013
• Flow Measurements with Portable Cut-Throat Flume and Broad Crested Weir in Flat Gradient Channels, Irrigation and Drainage Systems, Vol. 5, No. 2, May 1991
• Cutthroat Measurement Flume Calibration for Free and Submerged Flow Using a Single Equation, Journal of Irrigation and Drainage Engineering, Vol. 134, No. 4, August 2008
• Research on Hydraulic Characteristics of Cutthroat Flume in Irrigation District, Applied Mechanical and Materials, Vol. 137, October 2011
• Converting a Fabricated Cutthroat Flume into a Discharge Measuring Instrument, Report T-5, International Irrigation Management Institute, 1996
• Measurement of Flow in Supercritical Flow Regime Using Cutthroat Flume, Sadhana, Vol. 41, No. 2, February 2016
• Analysis of Hydraulic Characteristics of Cutthroat Flume, Al-Rafidain Engineering, 2012 
• Sampling Guide for Environmental Analysis:  Booklet 7 - Flow Measurement Methods in Open Channels, Centre d'expertise en analyse environmentale du Québec, May 2007
• Fabrication and Calibration of Three Cutthroat Flumes, Bangladesh Research Publications Journal, Vol. 3, No. 3, January-February 2010
• Distribution System of Irrigation Water in Bangladesh:  A Case Study of Bangladesh Agricultural University Farm, International Journal of Innovative Science, Engineering & Technology, Vol. 1, No. 10, December 2014
• Improved Calibration of Cutthroat Flumes, Irrigation Sciences, Vol. 25, No. 4, July 2007
• Model Calibration of a Prototype Cut-Throat Flume, Journal of Hydraulic Research, Vol. 25, No. 3, 1987
• 3-D Numerical Simulation of the Flow Field of Cutthroat Flume", Applied Mechanics and Materials, Vols. 488-489, 2014
• Guidelines for Designing and Evaluating Surface Irrigation Systems, Food and Agriculture Organization of the United Nations, Irrigation and Drainage Paper 45, 1989
• Hydraulic Characteristics of Pilot Distributaries in the Mirpurkhas, Sanghar and Nawabshah Districts, Sindh, Pakistan, International Irrigation Management Institute, Report R-28, June 1997
• Cutthroat Flume Discharge Ratings, Size Selection and Installation, International Irrigation Center, Department of Biological and Irrigation Engineering, Utah State University, 1993

User's Manual

• Cutthroat Flume User's Manual