This website uses a variety of cookies, which you consent to if you continue to use this site. You can read our Privacy Policy for
details about how these cookies are used, and to grant or withdraw your consent for certain types of cookies.
HS / H / HL Flumes
Rotate
Move
Initially designed to measure agricultural flows, H Flumes are a cross between a flume and V-notch weir, with sharp exits and flat floors. This hybrid shape makes H Flumes capable of measuring a range of flow types and ranges. H Flumes are particularly suitable for measuring low and highly variable flows.
The H Flume design accommodates a wider range, or “turndown ratio,” of flows than any other flume type. Two applications that are ideal for H Flumes include edge-of-field runoff monitoring and stormwater flows. For example:
- The nature of edge-of-field monitoring projects is to understand sediment movement in low flows, and the flat floor of H Flumes allows for this type of small debris to pass through.
- The excellent turndown ratio makes it possible to accurately measure both low and high flows.
Openchannelflow H Flumes can be customized to a variety of site conditions. The rectangular shape of the optional approach section makes it easy to attach multiple flow / parameter monitoring accessories or pre-condition the flow before it enters the flume.
While H Flumes can accommodate a variety of flows and are highly customizable, they might not be the right choice for every application. For example:
- Size is a factor. Small sizes of HS / H Flumes shouldn’t be used with sanitary flows or flows with larger debris that can get stuck.
- Free discharge. No matter the configuration, there must be free-spilling discharge off the end of an H Flume.
- Some simplicity, some complexity. While the flume itself is a simple device, the equation to calculate flow is complex. Not all flow meters come programmed with H Flumes, so double-check your meter selection.
If you need help sorting through the considerations for your application, we’re happy to help. Contact us.
HS / H / HL Flumes are available in:
- Aluminum, which is easy to handle and lightweight enough to be portable.
- Fiberglass, which is resistant to corrosion, competitively priced, and the best choice for sewage flows.
- Galvanized steel, which is easy to repair, the best choice when cost is a concern, but not for use on applications measuring sewage.
- Stainless steel, which is very strong, resistant to corrosion, and the most expensive.
Make the most of HS / H / HL Flumes with accessories including:
- Approach Sections for transitioning pipe flows and mounting accessories.
- Flow Conditioners come in a variety of shapes to slow or straighten flows.
- Drop Boxes collect and direct exit flow into discharge piping.
- Stilling Wells that isolate flow, dampening waves and surges, allowing for exact flow measurement.
- Flow Meter Mounts ensure sensors are in the right point of measurement within the flume, plus are easy for operators to use and adjust.
- Packaged Metering Manholes that combine with the flume for a complete, integrated structure for operators to measure and sample flows.
Get Started
Let’s bring your HS / H / HL Flume project to life.
There's more to learn in the OCF Research Center
Not sure where to start?
Get industry-leading technical guidance
Your needs are unique and Openchannelflow strives to meet you where you are. Try our Solve A Problem section where we walk you through some common problems and ways to solve them.
If you already have a good idea what you need, but just need more specifics, find exactly what you need in the Research A Solution section.
Contact Us
LOCATIONS IN ATLANTA, GA & BOISE, ID