This website uses a variety of cookies, which you consent to if you continue to use this site. You can read our Privacy Policy for
details about how these cookies are used, and to grant or withdraw your consent for certain types of cookies.
Filter By:
Dimensions
Two design goals determined the shape of the RBC Flume: ease of manufacture and conformance to the typical shape of irrigation ditches and furrows.
As a result, the RBC Flume has a flat, constant trapezoidal cross-section and a flat-sided ramp rising up in the throat.
The trapezoidal cross-section makes the RBC Flume easier to adapt to existing channels (unlike the Parshall). The shape eliminates the need to either set the flume above the channel floor or modify the downstream channel.
RBC Flumes are scale models of each other, with the base width the determining factor for all other dimensions.
Note that the dimensional tolerances of the throat are critical as a difference of 1% error in throat cross-section will cause an error in the discharge measured of 1%
The dimensions for the RBC Flume can be found in:
Throat length and ramp length have more margin for dimensional tolerance, but the intersection between the flume floor / ramp / throat must be distinct.
LOCATIONS IN ATLANTA, GA & BOISE, ID